LC-POWER LC-M27-FHD-240-C, Руководство пользователя

Страница: 18 / 63

Eng-5
4.
Take out the sha� assembly and bracket, and lock them �ghtly with 2
PM5x11mm screws, as shown in the figure below, and then lock the
base and bracket with hand screws.
5.
As show in the following pictures, put the finished components in step 4
in to the corresponding sinking groove of the rear case. gently press the
bracket to make the sha� assembly snap into the lock, and then hold the
middle posi�on of the bracket to li� the body twice. The buckle can be
used to ensure that the buckle can lock the base assembly;
6.
Hold the bracket with both hands to place a flat desktop and use the
machine by plugging in the cable
.
Note: During the process of erec�ng the machine, do not hold the screen
directly with your hand to prevent breakage; The li�ing range is 100mm,
and the an�-sliding effect should be taken into considera�on when extrac�ng.
When disassembling, follow the opposite steps, Make sure the monitor is
laid on a flat surface before removing the stand.
Scre
w
S
h
a
�
a
ss
e
mbl
y
Scre
w
H
a
nd s
cre
w