LBS DRAGON POWER 1-L, Руководство пользователя

Страница: 8 / 23

5
2. Installation
2.1 Setup the UPS
Sep 1: UPS inputconnection
Plug the UPS into a two-pole,three-wire, groundedreceptacle only. Avoidusingextensioncords.
Step 2: UPS output connection
For socket-typeoutputs, simply connect devices to the outlets. For terminal-type input or
outputs, please follow below stepsfor the wiring configuration:
a) Remove the smallcover of the terminal block.
b) Suggest usingAWG14 or 2.1mm²power cords.
c) Upon completion of the wiring configuration, please check whether the wires are securely
affixed.
d) Put the smallcover backto the rear panel.
Step 3: Communicationconnection
Communicationport:
RS232port Intelligent slot USB port
Toallow for unattended UPS shutdown/start-upandstatus monitoring, connect the
communicationcable one end to the USB/RS232port and the other to the communicationport
of your PC. With the monitoring software installed, you can schedule UPS shutdown/start-up
and monitor UPS status throughPC.
TheUPS is equippedwith intelligent slotperfect foreither SNMP or AS400card.When installing
either SNMP or AS400card in the UPS, it will provide advancedcommunicationand monitoring
options.
PS.USB port and RS-232portcant work at the same time.
Step 4: Turnon the UPS
Press the ONcombinationbuttons onthe front panel for two secondsto power on the UPS.
Note: The battery chargesfully duringthe first five hoursof normaloperation. Donot expectfull
battery run capability duringthis initial chargeperiod.
Step 5: External batteryconnection
ThisUPS doesnot include batteries.
Please connect external batteries asthe below drawing.
RS232interface on UPS:
3. ControlPanel