![LBC EWM-281 XA Скачать руководство пользователя страница 5](http://html.mh-extra.com/html/lbc/ewm-281-xa/ewm-281-xa_user-manual_681667005.webp)
clean, soft, lint-free cloth, and wipe the screen.
To clean the case:
1.
Use a soft, dry cloth.
2. If it still is not clean, apply a small amount of non-ammonia, non-alcohol based, mild non-abrasive
detergent onto a clean, soft, lint-free cloth, then wipe the surface.
Disclaimer
LWO does not recommend the use of any ammonia or alcohol-based cleaners on the LCD Display screen or
case. Some chemical cleaners have been reported to damage the screen and/or LCD display case.
LWADWELL Optical will not be liable for damage resulting from use of any ammonia or alcohol-based
cleaners.
Safety Guidelines
Warning:
This device must be operated with the original power supply.
CAUTION:
The socket-outlet should be installed near the equipment and should be easily
accessible.
CAUTION:
Use a power cable that is properly grounded. Always use the appropriate AC cord
that is certified for the individual country. Some examples are listed below:
USA...............…UL Switzerland……SEV
Canada.............CSA Britain ...........…BASE/BS
Germany……….VDE Japan ...............Electric Appliance Control
Act
IMPORTANT NOTICE CONCERNING POWER CORD SELECTION
The power cord set for this unit has been enclosed and has been selected according to the country of
destination and must be used to prevent electric shock. Use the following guidelines if it is necessary to
replace the original cord set, or if the cord set is not enclosed.
The female receptacle of the cord set must meet IEC-60320 requirements and may look like this :
Figure A1
Figure A2