Double click the desktop browser Icon,
open the web browser
Input 192.168.16.254 In the address field of browser,
and then press enter
In the prompt box,enter the username:admin
password:admln and click "OK".
Click "NEXT" and configure the wireless settings based
on your chosen wireless mode (RT,Client,AP).
If you are unsure of your internet access method,pie
refer to the below table or contact your ISP.
-Quick S e t - U p -
Did your
ISP
provide any network
parameters?
Internet connection
Did not provide any parameters
Dynamic IP
IP address, subnet mask, gateway,
DNS server
Static IP
Internet account and password
ADSL virtual dial-up
Enterprise server IP* Internet account
and password
PPTP/L2TP
- ® Set a network name that's easy to remember
-' @ Select your encryption method
-' (3)
Enter network password (8+characters]
-' ® Click 'Apply" and device will reset for 1-2 mins
Tip:You will need to reconnect to the new WiFi network after set-up,so be sure that your
SSID and password are easy to remember!
A d d : If the ISP binds your MAC address,you can set up in the left navigation bar of the router interface,
click"network "-"Mac Clone",then enter your MAC Address or click "fill" to copy it from the host
device.Then click "Apply" to take effect.
If BL-MP01 uses the parameters provided by ISP to connect to the Internet, you must first refer to above routing mode to make corresponding Internet connection Settings.
I — S t a t i o n C o n n e c t S e t u p
SSID
Security Mode
WPA Algorithms
Pass Phrase
BLINK
WPA2
-Personal v
О
TKIP ® AES
Apply
Cancel
A:Open"wireless",click"site_survey".
B:Find t h e SSID needed to link with or wireless access point and select; If not In the list,can c l l c k ' R e s c a n "
C:Click"connect".
D:Behind"Pass Phrase"input wireless hot spot password c o n n e c t e d .
E:Click"apply",start to connect.
Site Survey
SSID
V) Q B L I N K
-WA02
0 6
O B
- - W P 0 2
O f
3!
|.-WP03
O i
BSSID
RSSI Channel Encryption Authentication
Network
Type
48-02-2A-30-52-00 100%
6
AES
WPA2-PSK
Infrastructure
48-02-2A-80-38-20 95%
1
Not Use
OPEN
Infrastructure
48-02-2A-56-45-90 95%
3
Not Use
OPEN
Infrastructure
48-02-2A-34-DO-20 90%
9
Not Use
OPEN
Infrastructure
48-02-2A-C8-E5-82 85%
11
AES
WPA-PS K;
WPA2-PSK
Infrastructure
48-02-2A-64-52-70 82%
6
TKIP
WPA-PSK
Infrastructure
Cdnnected<—>BLINK
Connect
Disconnect
F:When you see a green background h a n d s h a k e Icon In front of the S S I D of
w i r e l e s s h o t s p o t c o n n e c t e d , m e a n s t h e c o n n e c t i o n of the device Is successful.
Plug and play In this mode,For setting wireless network name and p a s s w o r d , please refer t o ' R T m o d e ' w l r e l e s s setting steps to set up.
| Power light does not light?
1 .Check whether the power adapter(5V 500mA~2000mA) matches this product.
2.Please check whether the connection of the power is effective(if it uses USB to connect to PC,please confirm whether
the interface of the USB is available,if the USB voltage is insufficient, please try to replace other USB interface.)
Unable to access to web server of the device
1 .Check whether the connection of computer and device is correct and make sure the corresponding indicator is working normally.
2. Please note that whether Wireless Pocket Router is in router client mode, as In this mode user can only apply the wireless network
connection.
3.Check whether PC gets the IP address automatically from MP01 .If MP01 works under AP mode, the IP a d d r e s s and router
address are not in the same segment,please refer to the second step Computer Settings to set the same subnet manually
4.Affirm that your web browser Is the latest version and supports Java.
5.Disconnect the power supply of the router.connect the power a moment later, and then reboot the router. If you still cannot access,
please return to the factory settings and reset.
J
Why does the notebook fail to find the wireless signal?
1.If it is built-in wireless card, then check whether there is a wireless switch firstly,and check whether the switch Is turned on.
(You should confirm with notebook manufacturers or check notebook specifications).
2.Ensure the wireless card driver installs successfully and has been enabled.
3.Check the notebook computer is on the wireless services;lf not open,please run in service Wireless Zero Configuration.
4.Dispose any possibilities of displacement or interference.If interference is bigger,please try to modify other channels.If still
can't search .please return to the factory Settings and reset.
| What should I do if I forget the password(Router reset)?
If you forget the user name and password, the only way to solve this problem is to reset the router,The
method isasfollows:ln the state that equipment is energized,press the WPS/RESET button and keep it for 8 seconds,
then release the button :the reset Is done.
Note: The router's configured parameters will be removed after resetting, need to restart the configuration of the router
\ After all set-up ADSL dial-up users can't access to the Internet?
1 .Please make sure that your settings are correct,whether ADSL device works normally.
2.Please confirm whether the internet account and password inputted are correct(note:The letters are case-sensitive)
3.ln the router interface click 'system management"-'status',check whether the WLAN gets IP address,if gets the IP address.it means
that connecting to the internet network is successful.
4.Check that you can connect normally before connecting to MP01 ,if can't.please contact with the local ISP to solve.
j
Why did my laptop find the wireless signal,but cannot connect?
1 .Please confirm that the name of the wireless signal which you try to connect and the SSID number that you set are consistent.
2.Please confirm the strength of the wireless signal,if the signal is weaker.you're suggested to adjust the position of MP01 or
adopt closer connection.
3.Confirm whether the wireless password that you have inputted is correct.
4. Delete the original files of the configuration and then reconnect.The method is as follows:
XP OS:Open"Wireless network connection "-'Properties'-'Wireless network configuration',Delete all contents of the"first network'box.
WIN7 OS:Open "Network and sharing center'-'Wireless network management",Delete all contents.
5.Please make sure whether your wireless network card supports the encryption,if PC can connect without encryption,please
try to replace other encryption.If you are still unable to connect,please put the router back to the factory settings and reset.
l l B - L I I M K
ft
l i B - L I N I C
is the registered trademark of B-Link Electronic Co.,Ltd.AII other trademarks or registered trademarks mentioned in the document.owned by their respective owners. Product specifications and information mentioned in Email of technical s u p p o r t :
f
£ 09f
this manual is for reference only,if have contents to update without prior notice.Unless there is a special agreement, this manual is only as instructions, all of this manual altogether, information can not constitute any form of guarantee.
infO
@lGfGI1aCOH1 ^ ^
RT mode
Q u i c k S e t - U p
The router can connect to a network with multiple commonly used means ol
access. Please choose yours below. (Please Note: If you are unsure which setting
to choose, try the default choice first)
DHCP {Auto Config)
Static Mode (fixed IP)
PPPoE (ADSL)
L2TP
PPTP
Back
Next
Cancel
Apply
User Name
Password
Verify Password
Keep Alive
Keep Alive Mode: Redlal Period
seconds
On demand Mode: idle Time
minutes
Operation Mode
Back
Next
Cancel
Apply
•Quick Set-Up'
Server IP
User Name
Password
Address Mode
IP Address
Subnet Mask
Default Gateway
Operation Mode
Keep Alive Mode: Redial Period
seconds
Back ] I Next Cancel | [
•MAC Clone
Select
MAC Address
Apply I [ Cancel
Set static IP information provided to you
by your ISP. Click "NEXT".
To configure ADSL,input your ISP
givenusername and password and
click "Next".
network name(SSID)
security
KEY
•Quick S e t - U p •
Select L2TP or PPTP.please input
Internet account and password provided
to you by your ISP.enterprise server IP
address and other parameters.Click
"Next".
Note: before using MP01,please ensure that you can use
the Internet parameters provided by ISP in a desktop
successful online.If you have any problem,Please first
contact the ISP providing a broadband service to solve
the problem.
F r e q u e n t l y A s k e d Q u e s t i o n
If the following solutions cannot solve your problem,please call our B-LINK technical support hotline at 400-652-9989,and our engineers will provide you
with professional solutions.Alternatively.you can log into the official B-LINK website at http://www.b-link.net.cn to get additional product information.
