lazzarini Way E-Mirror, Инструкция по эксплуатации, Страница: 46 / 72

The radiators are equipped with an advanced control system with touch-
screen controls and light indicators which indicate the set function.
Changes in settings are also remarked by an acoustic signal.
- When connecting the power supply, all the LEDs light up for 2 seconds
and you will hear a long “beep”. After this, only L1 and L8 will remain
on.
- Touch T2 if you wish to heat up the room at low temperature. The L2
and L7 green LEDs will light up and you will hear a “beep”. When the
surface of the radiator reaches the set temperature, L7 switches on and
off cyclically in order to maintain the set temperature.
- Touch T3 if you wish to heat up the room at medium temperature. The
L3 and L7 green LEDs will light up and you will hear a “beep”. When
the surface of the radiator reaches the set temperature, L7 switches on
and off cyclically in order to maintain the set temperature.
- Touch T4 if you wish to heat up the room at maximum temperature. The
L4 and L7 green LED will light up and you will hear a “beep”. When the
surface of the radiator reaches the set temperature, L7 switches on and
off cyclically in order to maintain the desired temperature.
- Touch the T5 button if you wish to have the maximum surface
temperature for a limited time (2 hours), the L5 and L7 LEDs will light
up. The radiator will operate at maximum temperature for 2 hours, after
which, it will go back to operate in the function set before the Boost
function.
- If after the settings you wish to lock the keypad, press the T6 button for
5 seconds - you will hear 4 beeps confirming the setting.
When touching the other buttons lightly, the L6 LED will flash for 2-3
seconds indicating the keypad is currently locked.
Only the T1 button will remain operational, so to put the appliance on
stand-by at any time.
To reactivate the keypad, press the T6 button for 5 seconds -
4 consecutive beeps will confirm the setting.