LAZER XLZSHR070L, Руководство пользователя

Страница: 4 / 20

4
TRANSPORTING THE MACHINE

Always turn off the engine.

The engine should be turned off when the machine is moved between areas and when
transporting or storing the machine.

When transporting in a vehicle: properly secure your machine to prevent turnover, fuel spillage
and damage.
FUELLING

Petrol is an extremely flammable fuel. Keep clear of naked flames. Do not spill any fuel
– do not
smoke near fuel or the machine.

Always shut off the engine before refueling.

Do not fuel a hot engine
– fuel may spill and cause a fire. Open the fuel cap carefully to allow
any pressure build-up in the tank to release slowly and avoid fuel spillage. Fuel your machine
only in ventilated areas. If you spill fuel, wipe the machine immediately
– if fuel get on your
clothing, change immediately.

To reduce the risk of serious or fatal burn injuries, check for fuel leakage. If fuel leakage is found,
do not start or run the engine until leak is fixed.
DURING OPERATION

Make sure you always have good balance and secure footing.

Always be aware of your surroundings and stay alert for possible hazards that you may not hear
due to the noise of the machine.

Never allow children to access the machine.

Avoid operating while people, especially children are nearby.

To reduce the risk of injury, do not allow any other persons within a radius of 25 meters of your
own position. To reduce the risk of damage to property, also maintain this distance from other
objects (vehicles, windows).
AFTER FINISHING WORK

Always clean dust and dirt off the machine
– do not use any grease solvents.

Always keep the machine clean, especially, the fuel tank, its surroundings, and the air cleaner.

After the engine has stopped, the muffler will still be hot. Never place the machine in any places
where there are flammable materials such as dry grass, combustible gases or combustible
liquids etc.
MAINTENANCE AND REPAIRS

Service the machine regularly. Do not attempt any maintenance or repair work not described in
the instruction manual. Have all other work performed by a servicing dealer.

We recommend that you have servicing and repair work carried out exclusively by an authorized
service person.

Before proceeding to adjust or repair the machine, be sure to stop the engine and detach the
spark plug.

Never attempt to make engine adjustments while the unit is running or strapped to the operator.
Always make engine adjustments with the unit resting on a flat, clear surface.