LAZER Urbanize, Руководство пользователя

Страница: 2 / 6

2. How to recharge the rear LED light
The LED light in the Lazer Urbanize
will need to be charged before use.
After approximately 8 hours of use
on constant mode you will need to
recharge your battery.
To do this you will need to remove
it from the helmet.
1. Reach into the helmet, push the
head basket away slightly and push
the light out of the back of the helmet
as shown in diagram 2A.
3. Now using the cable provided,
plug the battery in to a standard 5V
USB power source (smartphone
charger, computer USB port) of a
renowned manufacturer. Charge for
approximately 2 hours to fully charge
the light. During charging time, the
battery signal led will turn solid red and
when it is 100% charged, the charging
LED will go out. Feel free to charge
it up at work while your helmet is
safely locked to you bike using
the lock hole.
2
URBANIZE
2A)