ECOMOW470 Cordless Electric Mower- Safety & Operating Instructions
Step 5: Adjust the Cutting Height
Using the Cutting Height Lever located at the side of the rear left wheel (
Figure 8
), adjust the Cutting
Height so that you cut off only one (1) to two (2) inches of grass at a time.
Each position adjusts the Mower’s Blade level to
a different Cutting Height. Pushing the Cutting Height
Lever towards Position 1 cuts more grass (which leaves
your grass shorter); pushing the Lever towards
Position 5 cuts less grass (leaving your grass
longer).
Lever Position Cutting Height
1 7
mm
2 6
mm
3 5
mm
4 4
mm
5 3
mm
Figure 8
Cutting
Height
Lever
Step 6: Insert the Battery after being fully Charged
1. When your first charge is completed, insert the battery to the mower. Orient the Battery as shown in
Figure 9
.
2. After confirming the correct orientation of the Battery, insert the Battery fully into the Battery
compartment.
3. Turn the Battery Retainer Arm back over on top of the Battery to secure it in place (
Figure 10
).
Figure 9
Fully Charged
Battery Pack
Figure 10
Retainer Arm
6
