Defender Press Brake Guarding System Operation Manual
LS-CS-M-069
Page 23
Original Language Version: 1.04
Released:
01/04/2020
5.6.1
User Guides
The User Guides are navigated in the same way as menus, using the arrow buttons. The
arrow buttons step through the list of guides; the desired guide is then selected by pressing
the
ENTER
button. Refer to
Section 7.1.1
for a description of how to navigate menus.
a
Figure 5-7: User Guide Screen
Label
Button Function
This leaves the User Guide and returns to the User Guide list. See
for an overview of the menu system.
Selects the next page in the guide.
Selects the previous page in the guide.
Table 5-4: User Guide Buttons
The User Guides are simple, step by step graphical guides for common procedures that need
to be performed regularly on Lazer Safe equipment (such as how to align LZS-1 laser
guards). If the guide contains more than one page, the left/right arrow keys can be used to
navigate the pages of the guide.
5.7
Info Screen
The Info screen is selected from the Main screen, and displays information about the
Defender system, and the press brake. The screen can be switched between displaying
System Information and Machine Information.
Note:
The system parameters are stored in the Defender User Interface Panel, and the
system cannot run if the panel is disconnected. The safety application running on
the PGS-2 monitors the system heartbeat signal.
If the heartbeat signal is not detected for 10 seconds, the safety application
disables the down enable outputs. If the foot pedal is pressed, the PGS-2 LCD
screen shows the Condition Code
40A1
.
