Page 5 of 6
Step 6. Insert the leg connecting plate (E) to the one of the long leg connector (D). (Figure 5)
Figure 5
Step 7. Then insert the leg connecting plate (E) to the other long leg connector(D) and at the
same time assemble the long leg connector to the table legs with bolts (F) and Washers (G).
(Figure 6)
Figure 6
Step 8. Check the alignment of all table legs (B) and adjust if necessary. Once the alignment is
correct, tighten all bolts (F) with open wrench (I).
Step 9. Cover all bolts (F) with bolt covers (H). Then carefully turn the table right side up.
Step 10. Place the glass on the table rim as shown in figure 7. Your table is now ready to use.
(Figure 7)
Figure 7
