21
20
PowerReclineXR
®
& PowerReclineXRw
™
Operating Instructions
PowerReclineXR
®
& PowerReclineXRw
™
Operating Instructions
– To reduce the risk of electric shock, serious
injury or death:
• Plug directly into a wall outlet. Do not use an extension cord, adapter or surge protector.
DANGER
– To reduce the risk of serious injury:
• Sit down in the unit slowly. To avoid tip over, do not throw your weight against the back
of the unit. Move the unit into or out of the reclining position slowly, making sure that
no children or pets are in close proximity.
• Keep hands, arms and body parts away from the open area between a reclined back and
an upright back on a motion sofa or modular. This area must remain clear at all times to
provide unobstructed movement and prevent injury that could occur when a reclined back
is returning toward the upright position.
• The PowerReclineXR
®
and PowerReclineXRw
™
units are intended for a single occupant not
exceeding 300 pounds per seat. Do not operate an individual seat with more than one
occupant in or on any part of the individual seat.
• To safely exit the unit and prevent a tripping hazard, bring the back upright
and close the legrest.
WARNING
To avoid product damage, the back recline and legrest extension features should not be operated continuously
for extended periods of time. After 1 minute of continuous operation, allow these features to rest for 9 minutes.
Plug the power cord directly into a wall outlet.
Make sure there is enough slack in the cord running
from the chair to the outlet to allow for rocking and reclining. Never stretch or strain a cord.
The PowerReclineXR
®
and PowerReclineXRw
™
offers three reclining options:
• Only recline the back. When the back is reclined, the PowerReclineXR
®
chair can be rocked.
• Only extend the legrest. When the legrest is extended, the chair body tilts backward.
• Operate both the back recline and legrest extension simultaneously.
Back Recline:
Press and hold down the top, front button. Release the button when you have reached a comfortable position.
To return the back to the upright position, press and hold down the top, back button. Release the button
when you have reached a comfortable position, or when the back is fully upright.
Legrest Extension:
Press and hold down the bottom, front button. Release the button when you have reached a comfortable position.
To return the legrest to the closed position, press and hold down the bottom, back button. Release the
button when you have reached a comfortable position, or when the legrest is fully closed.
Back Recline and Legrest Extension:
The back recline and legrest extension can move simultaneously by pressing and holding both front buttons
at the same time, releasing the buttons when you have reached a comfortable position.
The reclined back and extended legrest can also be returned simultaneously by pressing and holding both
back buttons at the same time, releasing them when you have reached a comfortable position, or the back is
fully upright and the legrest is fully closed.
The function of each button is explained in greater detail on the following page.
Unplug the power supply if you are going to be away from your residence for an extended period of time.
NOTICE:
After 1 minute of continuous operation, allow the back recline
and legrest extension features to rest for 9 minutes.
Press and hold down the top, back button to return the
back to the upright position. Release the button to stop
the back in any reclined position or when fully raised.
Back
Return
Legrest
Extension
Back
Recline
Charging
USB Port
Press and hold down the top, front button to recline
the chair back. Release the button to stop the back
in any reclined position or when fully reclined.
Press and hold down the bottom, back button to
close the legrest. Release the button to stop the
legrest in any extended position or when fully closed.
Press and hold down the bottom, front button to
extend the legrest and tilt the chair body backward.
Release the button to stop the legrest in any
extended position or when fully raised.
USB Charging Port Instructions
Plug a small portable electronic device into the USB charging port.
The USB port is for charging only
and does not have data transferring capabilities.
USB Output Specifications:
5VDC, 2.1A
Legrest
Return
Press and hold down the
back top and bottom
buttons to raise the back
and close the legrest and
return the chair body.
Release the buttons to
stop the chair in any
position or when the
back is fully raised and
the legrest is fully closed.
Press and hold down
the front top and
bottom buttons to
recline the back and
extend the legrest
and tilt the chair body
backward. Release
the buttons to stop the
chair in any position
or when the back is
fully reclined and the
legrest is fully raised.
– To reduce the risk of serious injury:
• Do not use unit if power control is damaged or wet. Do not use unit if the button activation
switch or hand wand has been exposed to, or dropped in, water or any liquid. Contact your
La-Z-Boy
®
dealer for service.
WARNING
