17
16
Operating Instructions
For Optional Wireless Remote
Operating Instructions
For Optional Wireless Remote
Back button
Press the Back button arrow UP and hold
to recline the back. Or press the arrow
DOWN and hold to return the back to the
upright position. Release the button to
stop the back in any reclined position
or when fully reclined or fully raised.
Home button
Press and release the Home button to
automatically return the furniture to its
upright, closed and stored position.
Memory I and
Memory II buttons
Press and release the
Memory I or Memory II
button to automatically move
the furniture to a stored setting.
(pressing and holding
stores the setting)
Legrest button
Press the Legrest arrow UP
and hold to extend the
legrest and tilt the chair
body backward. Or press the
arrow DOWN and hold to
close the legrest and return
the chair body. Release the
button to stop the legrest in
any extended position or when
fully raised or fully closed.
Lumbar button
Press the Lumbar button
+ and hold to increase the
lumbar intensity. Or press
the – and hold to decrease
lumbar intensity. Release the
button to stop the lumbar in
any position or when fully
extended or fully retracted.
Headrest button
Press the Headrest button
arrow UP and hold to rotate
the headrest forward. Or
press the arrow DOWN and
hold to return the headrest.
Release the button to stop
the headrest in any position
or when fully extended or
fully retracted.
– To reduce the risk of burns, electric shock,
serious injury or death:
• Liquids exposed to electricity pose an immediate risk of electric shock. Do not use this
unit if the power control is damaged, wet, in contact with or near spilled water or any
liquid. Do not use the unit if the button activation switch has been exposed to water or
any liquid. Do not handle the plug or remote control with wet hands.
DANGER
Memory I button
Press and release the Memory I button
to automatically move the furniture to the
stored setting.
(pressing and holding stores the setting)
Home button
Press and release the Home button to
automatically return the furniture to its
upright, closed and stored position.
Find Me
Press the Find Me
button to send a signal
and locate the remote.
LED lights flash and a
loud tone plays from
the remote when the
signal is received, and
the remote equipped
with three working
AAA alkaline batteries.
Do Not Disturb
Slide the Do Not Disturb button to the Left (as facing)
position to turn on the feature and block out
communication between the remote and furniture.
This essentially turns off the remote commands
to safeguard against undesired movement of the
furniture.
Slide it to the right (as facing) to turn off the
feature, and allow communication with the remote.
USB port
Connect a USB cable
to the port to charge
a device.
– To reduce the risk of burns, electric shock,
serious injury or death:
• Liquids exposed to electricity pose an immediate risk of electric shock. Do not use this
unit if the power control is damaged, wet, in contact with or near spilled water or any
liquid. Do not use the unit if the button activation switch has been exposed to water or
any liquid. Do not handle the plug or remote control with wet hands.
DANGER
Memory II button
Press and release the Memory II button
to automatically move the furniture to the
stored setting.
(pressing and holding stores the setting)
USB Output Specifications:
5 VDC, 1.0A
