Page 4 of 5
Assembly Steps:
Step1: Turn the table top (A) upside down on a soft, non-abrasive surface carefully.(See Figure 1)
Figure 1
Step2: Attach the table legs (B) to table top (A) with M6 x 15mm hex head bolt (D), M6 washer (E).
Do not fully tighten at this step. (See Figure 2)
Figure 2
Step3: Attach the leg connector (C) to table legs (B) with M6 x 15mm hex head bolt (D), M6 washer
(E). Tighten all bolts with hex wrench (G). Cover all the bolts with bolt caps (F). (See Figure 3)
Figure3
