9
Assembly Instruction
(continued)
3
Attaching the T-Rocker
□
Turn the chair bucket over and place the front side down.
□
Attach the T-Rocker (E) to the U bar on the back/seat frame (C) using M8 hex bolts (CC), M8
washers (FF), steel plate (II), M8 lock washer (GG) and M8 nut (HH). The sequence should
be M8 hex bolts (CC), M8 washer (FF), steel plate (II), back/seat frame (C), T-rocker (E),
steel plate (II), M8 washer (FF), M8 lock washer (GG) and M8 nut (HH).
□
Ensure all bolts are aligned and assembled correctly.
□
Tighten all M8 bolts (CC) and M8 nuts (HH) with the hex wrench (MM). Attach the M8 plastic
caps (KK) to M8 bolts (CC) and nut cap (LL) to M8 nut (HH).
