Page 3 of 6
Important Safety Instructions:
Important: Read these instructions thoroughly before using
WARNING
— To reduce the risk of burns, fire or serious injury:
• Always keep open flame and lit cigarettes away from outdoor furniture. Outdoor furniture may burn
rapidly with toxic gas and thick smoke.
• Closely supervise children and disabled persons using this product.
• Sit down in the unit slowly. To avoid tip over, do not throw your weight against the back of the unit. Move
the unit into or out of the reclining position slowly, making sure that no children or pets are in close
proximity.
• This product has many moving parts, serious injury can occur if not used properly. Keep hands, fingers
and body parts away from the mechanism. To reduce the risk of head entrapment and other injuries, keep
children and pets away from openings and moving parts in and around furniture.
• Only the occupant should operate the unit. Never attempt to open the leg rest by pulling on it.
• Do not stand, sit or place extra weight on the arms, back or open leg rest.
• To safely exit the unit and prevent a tripping hazard bring the back upright and close the leg rest.
• Do not use this product if it is damaged. Do not use attachments or substitute parts.
• Provide a clear path
for operation of the back and leg rest. Place tables and area rugs at a distance to allow the leg rest to fully
extend without rubbing or interference.
• This product is not intended for use as a health care device.
• Do not operate the unit until the back is installed and locked.
• Use care when moving the product. Before lifting the product, secure the mechanism to prevent
unexpected opening or movement. Never move the product by the mechanism, leg rest or reclining back.
Disconnect modular units. Securely grip non-moving parts only.
• Keep hands away from the internal frame parts. (Figure 1 and Figure 2).
SPECIAL WARNINGS
In order to avoid damaging the item, assemble the item on a soft, non-abrasive
surface, such as a carpet or cardboard. When assembling bulky or heavy items,
work with an assistant. After final alignment, verify that all bolts, nuts, and nut
covers are securely tightened.
Note:
Identify all parts packed in the carton against the Parts List. Remove
all of the protective material carefully, and DO NOT use a knife in order to
avoid scratching the furniture. Do not tighten the bolts until the product is
completely assembled.
