LawnMaster TE1016M, Руководство оператора

Страница: 14 / 25

ASSEMBLY
14
This product must be assembled correctly before use.
1. Remove the plane washers (O5) ， wave washers (O5)
and screws ( M5x12 ) from wheel axis of tiller
，
then place
one wheel (12) over each side of axle, then attach using
plane washer (O5) ， wave washer (O5) and screws
( M5x12 ) to secure (Fig1-1
).
2. Press the wheel covers into the wheel and cover the
ends of the axles. A rubber mallet may be used to seat
them securely onto the wheels ( Fig1-1 ).
3. Attach the center handle section (7) to the lower handle
section (10) using the two supplied bolts, washers and camlocks (6) (Fig.1-2).
4. Fasten the upper handle section (5) to the center handle section (7) using the two supplied bolts
and camlock and washer (6) (Fig.1-3).
5. Use the two supplied cable clips (4) to secure the cord (Fig.1-4).
WARNING:
WARNING:
WARNING:
If any parts are damaged or missing do not operate this product until the
parts are replaced. Failure to heed this warning could result in serious
personal injury. Call our customer service help line.
Do not attempt to modify this product or create accessories not
recommended for use with this product. Any such alteration or
odification is misuse and could result in a hazardous condition leading to
possible serious personal injury.
Do not connect to power supply until assembly is complete. Failure to
comply could result in accidental starting and possible serious personal
injury.
O5
O5 M5X12
Fig1-1
M6X57
M6X57
O6
O6
O6
4
Fig1-2 Fig1-3 Fig1-4