LawnMaster NPTBL26A, Руководство оператора

Страница: 26 / 80

26
MAINTENANCE
the exhaust port. This may occur depending on the type of fuel used, the type and amount of lubricant
used, or the operating conditions. In order to restore performance, take the blower to an authorized
service center or qualified individual to remove the blockage.
The spark arrestor must be cleaned or replaced every 50 hours or yearly to ensure proper performance
of your product. Spark arrestors may be in different locations depending on the model purchased.
Please contact your nearest service dealer for the location of the spark arrestor for your model.
CLEANING THE AIR FILTER (See Figs. 22-25)
Keep the air filter clean for proper performance and long life.
■ Rotate the air filter knob counter clockwise and gently pull off the air filter cover (Fig. 22).
■ Remove the air filter (Fig. 23).
NOTE: Inspect the filter for damage and replace with a new filter if necessary.
■ Clean the foam filter with warm soapy water and rinse. Air dry the filter.
■ Place the air filter back, ensuring that it properly seated onto the base. Installing the filter correctly
will decrease the chances of engine wear caused by dirt entering the engine (Fig. 24).
■ Replace the air filter cover ensuring the air filter is completely covered (Fig. 25).
■ Turn the air filter knob clockwise to secure the air filter cover.
Fig. 23
Fig. 24 Fig. 25
Fig. 22
Close
Open
Air Filter Air Filter Cover Air Filter
Knob