LawnMaster MEH1836, Инструкция по эксплуатации

Страница: 9 / 27

9
SAFETY INFORMATION
− Replace or repair any damaged parts,
− Check for and tighten any loose parts.
■ Keep all nuts, bolts and screws tight to be sure the machine
is in safe working condition.
■ Check the grass collector frequently for wear or
deterioration.
■ Be careful during adjustment of the machine to prevent
entrapment of the fingers between moving blades and fixed
parts of the machine.
■ Always allow the machine to cool down before storing.
■ When servicing the blades be aware that, even though the
power source is switched off, the blades can still be moved.
■ Replace worn or damaged parts for safety. Use only
genuine replacement parts and accessories.
■ The machine should be supplied via a residual current
device (RCD) with a tripping current of not more than 30
mA.
■ Ensure that the mains voltage matches the specifications
on the rating plate.
■ Use only authorised power cables of type H05VV-F, which
are no more than 75 m long and suitable for outdoor use.
The power cable wire cross section must be at least 2.5
mm
2
. Always completely unroll cable drums before use.
Check the cable for damage.
■ Keep the power cable away from the cutting tool when
working. The cutting blades may damage the power cable
and result in contact with live parts. Always run the power
cable behind the operator. The extension cable can be
accidentally cut. Risk of electric shock!
■ Do not use the power cable to pull the plug from the socket.
Protect the power cable from heat, oil and sharp edges.