J
O
N
4
D
INSTALLING THE GRASS CATCHER (FOR REAR BAGGING OPERATION) (4)
NOTE: When using the grass catcher (D), do not
install the mulching plug.
•
Remove battery.
•
Lift the rear discharge door (N).
•
Lift the grass catcher (D) by its handle and
place under the rear discharge door (N) so
that the hooks on the grass catcher are seated
onto the slots on the mower housing.
•
Release the rear discharge door (N).
•
Reinstall battery when you are ready to mow.
5
15
TO INSTALL BATTERY (5)
WARNING
Always remove battery from
your tool when you are
assembling parts, making
adjustments, cleaning, or when
not in use. Removing battery will
prevent accidental starting that
could cause serious personal
injury.
•
Raise the battery cover (J).
•
Place the battery in the mower.
•
Align raised ribs on battery with grooves in the
mower’s battery port.
•
Push down into battery compartment until the
battery clicks into place.
•
Lower the battery cover.
WARNING
Make sure the latch on top of the battery with battery release button snaps in
place and the battery is fully seated and secure in the mower’s battery port before
beginning operation. Failure to securely seat the battery could cause the battery to
fall out, resulting in serious personal injury.
To remove battery
•
Press the battery release button (O) on the mower. This will cause the battery to raise out of the
tool slightly.
•
Raise the battery cover.
•
Remove battery from the mower.
