LawnMaster L951151, Перевод оригинальной инструкции по эксплуатации

Страница: 20 / 33

20
Note:
• This engine is designed so that overflowed fuel due to pushing a priming pump is to be
returned to the fuel tank.
• There is no fear of flooding the engine, so push the priming pump enough times to get the
engine started.
Move the choke lever to the “START” position.
When the engine is already warm up,set the choke lever to the “RUN” position.
Danger! Exhaust gases contain carbon monoxide, a colorless, odorless,
poisonous gas. Do not operate the engine in enclosed areas. Provide
adequate ventilation at all time.
2. Set the on/off switch (40) on the switching element (22).
3. Move the throttle lever on the equipment to START (engine idle speed) position.
4. Slowly push the priming pump (see picture 1, no. 7) several times until the fuel comes out
of the overflow tube.
5. Choke lever type:
Choke lever
Priming pump
Fuel inlet tube
Over flow tube
(transparent)