LawnMaster CLMFR6020A 0802, Руководство оператора, Страница: 29 / 40

29
REPLACING THE MOWER BLADE
NOTE: Remove safety key and battery before performing any maintenance!
NOTE: Only use identical replacement blades. LawnMaster® mower blade replacement part
#211064116
1. Stop the motor and allow the blade to come to a complete stop.
2. With the blade stopped, remove the SAFETY KEY and the BATTERY from the mower and store in
safe location.
3. Remove the collection bag from the mower if attached.
4. Slowly turn the mower onto its side.
5. Wedge a block of wood between the blade and the mower deck in order to prevent blade from
turning while the blade nut is being removed (Fig. 20).
6. Loosen the blade nuts using a wrench or socket (not provided).
7. Remove the blade nuts by turning counter-clockwise, and then remove the blade.
8. Place the new blade on the shaft. Make sure it is installed with the curved ends pointing up toward
the mower deck and not down toward the ground.
9. Thread the blade nuts on the shaft and finger tighten to ensure the bolt is properly tightened.
10.Torque the blade nuts down using a torque wrench (not provided) to ensure the bolt is properly
tightened (Fig. 21).
NOTE: Make certain all parts are replaced in the exact order in which they were removed.
WARNING
Before performing any maintenance, make sure the mower is unplugged from the power supply and
battery has been removed. Failure to heed this warning could result in serious personal injury.
WARNING
Always protect hands by wearing heavy gloves and/or wrapping the cutting edges of the blade with rags
and other material when performing blade maintenance. Failure to heed this warning could result in
serious personal injury.
MAINTENANCE