LawnMaster CLMF2437G, Инструкция по эксплуатации, Страница: 25 / 66

25
MAINTENANCE
General Maintenance
■ Keep all safety devices, air vents and the motor housing free of dirt and dust. Avoid using
solvents when cleaning plastic parts. Most plastics are susceptible to damage from various
types of commercial solvents and may be damaged by their use. Use clean, dry cloths to
remove dirt, dust, oil, grease, etc.
■ Periodically check all nuts and bolts for proper tightness to ensure safe operation of the mower.
■ Remove any buildup of grass and leaves on or around the motor cover. Wipe the mower clean
with a dry cloth occasionally. Do not use water as this may damage any electrical components.
■ The underside of mower deck should be cleaned after each use as grass clippings, leaves, dirt
and other debris may accumulate causing rust and corrosion.
Always wear protective, heavy gloves and/or wrap the cutting edges of the blade with rags when
performing blade maintenance. Failure to pay attention to this warning could result in serious
personal injury.
Before performing any maintenance, make sure the isolator key and the battery have been
removed. Failure to heed this warning could result in serious personal injury.
WARNING
WARNING
If a part becomes worn or damaged, use recommended manufacturers replacement parts. Use of
any other parts may create a hazard or cause product damage.
Do not use any attachments or accessories not recommended by the manufacturer of this product.
The use of attachments or accessories not recommended can result in serious personal injury.
Always switch the product off, remove the isolator key and the battery pack and let the product
cool down before performing inspection, maintenance and cleaning work!
WARNING
WARNING
WARNING
Replacing the Blade (See Figs. 18-19)
NOTE:
Remove the isolator key and battery before performing any maintenance!
NOTE: If the blade is blunt, damaged or showing signs of imbalance, it must be replaced. Use
recommended replacement blade.