LawnMaster CLGT2425S, Инструкция по эксплуатации, Страница: 14 / 31

14
ASSEMBLY
Assembly Preparation
■ Carefully remove all contents from the product packaging.
■ Ensure you have all the accessories and tool(s) needed for assembly and operation. This also
includes suitable personal protective equipment.
Fitting the Safety Guard (See Fig. 1)
■ Position the safety guard over the trimmer head and onto rear of the motor housing as shown.
■ Secure the guard with screws using a screwdriver (Fig. 1).
Attaching the Auxiliary Handle (See Fig. 2)
■ Loosen the quick release knob anti-clockwise and remove it from the auxiliary handle.
■ Pull the ends of the auxiliary handle to extend the handle and slide it over the handle holder.
■ Insert in the quick release knob and tighten clockwise by hand. To lock the auxiliary handle in
place, fold the knob inwards using moderate force. If it feels too tight when folding in, turn it
anti-clockwise to loosen. Do not use excessive force (Fig. 2).
Supporting Wheels (Optional Use) (See Figs. 3-5)
■ Loosen the wing knob anti-clockwise. Remove the wing knob and washer from the supporting
wheels (Fig. 3).
■ Put the supporting wheels onto the telescopic shaft (Fig. 4).
■ Re-install the washer and the wing knob and tighten clockwise by hand to fix the supporting
wheels (Fig. 5).
NOTE: The position of the supporting wheels can be adjusted by loosening the wing knob
and moving to the desired position. The supporting wheels can be moved to up and down the
telescopic shaft depending on the height of cut required.
Cut taller grass in stages; remove the supporting wheels when cutting long grass.
Installing and Removing the Battery Pack (See Fig. 6)
■ Insert the battery pack along the support rails into the battery housing. Ensure it clicks firmly into
place (Fig. 6).
■ To remove the battery pack, press the release button on the battery and remove from the
trimmer.
The trimming line cutting blade on the safety guard is sharp. When fitting the guard avoid contact
with the blade. Failure to avoid contact can result in serious personal injury.
WARNING
Do not insert the battery until the product is fully assembled. Risk of injury!
WARNING