LawnMaster BQH2000, Инструкция по безопасности и эксплуатации

Страница: 21 / 34

21
2. GENERATOR MAINTENANCE
Use a damp cloth to clean exterior
surfaces of the generator. Use a soft
brush to clean the dirt and oil.
Use an compressed air (25 PSI) to clear
dirt and debris from the generator.
Inspect all air vents and cooling slots to
ensure that they are clean and
unobstructed.
WARNING
DO NOT use water to clean the generator.
Water can enter the generator through the
cooling slots and damage the generator
windings.
DO NOT modify the generator in any way.
DO NOT tamper with the governor.
Generator supplies correct rated
frequency and voltage when running
at factory. Tampering with the factory
governor will void your warranty.
3. ENGINE MAINTENANCE
ENGINE OIL
Only use four-stroke engine oil of SJ, SL or
equivalent level which are in accordance
with or higher than API standard.
Check the API label on oil bottle or other
container, and make sure the “SJ, SL” or
equivalent level letter is in the label.
SAE 1 0W-30 is recommended for general,
all-temperature use. Other viscosities
shown in the chart may be used when the
average temperature in your area is within
the indicated range.
Oil capacity {rated):
See parameters
Add oil
A. Place the engine on a level Surface.
B. Remove the dipstick and wipe it clean.
C. Add recommended oil to the upper
limit.