Thank you for purchasing the Lawn Star Lawnmower which is one of the finest and most advanced
lawnmowers today’s technology can produce. Before you begin using it, please read this manual carefully
and familiarise yourself with the control and the proper use of this product to ensure you get the best
possible performance from it. The operator or user is responsible for accidents or hazards occurring to other
people or their property.
SAFETY PRECAUTIONS
Inspect your lawnmower and its supply/extension cable before each operation. If any part is damaged or
worn, repair or replace before operation. Do not operate with damaged, coiled or tangled supply/extension
cable. Keep cable away from the cutting blade.
Use only genuine Lawn Star (Pty)Ltd. replacement parts when servicing or repairing the unit. These parts
are available from your supplying dealer or service agent. Use only genuine Lawn Star replacement cutting
blade Part No. M-256-00.
WARNING :
To prevent electrical shock hazards, use only extension cables suitable for outdoor use with
splash-proof socket outlets, preferably protected by a sensitive Residual Current Device (RCD) with
tripping current of not more than 30 mA.
Pull the plug from the socket whenever you leave the machine unattended, before clearing a blockage,
before checking, before cleaning or working on the appliance, before changing parts such as the blade,
after striking a foreign object (inspect the appliance for damage and make repairs as necessary) or if the
appliance starts to vibrate abnormally (check immediately).
The operator must wear protective clothing, long trousers and sturdy, non-slip footwear.
Do not operate the mower when barefoot or wearing open sandals.
Do not use your lawnmower for any jobs other than those for which it was intended.
Do not use unless the entire grass catcher is attached or the rear guard is in place.
Do not switch on mower unless all four wheels are resting squarely on the lawn being mowed. Do not tilt
or lift mower while switched on. Switch off mower before pushing over surfaces other than grass.
Do not force your lawnmower. If motor labours, mow in multiple passes at different height settings.
Keep hands and feet well clear of rotating blades while the mower is in use. Cutting blades continue to
rotate for a few seconds after switch-off. Never pick up or carry mower while the motor is running.
Inspect the area to be cut and remove all debris that could be entangled in the cutting blades. Also remove
any solid objects, e.g. stones, sticks, wires and bones that the unit may sling during cutting.
Exercise extreme caution when mowing and changing direction. Always walk, never run. Never cut grass
by pulling the mower towards yourself. Do not walk backwards while mowing, you may trip.
Avoid dangerous environments. Do not use the unit in poor light or in damp or wet locations. Do not use
in the rain. Do not use on steep slopes, especially if damp. Work across slope faces, not up and down. Do
not over-reach. Ensure good footing and balance are maintained.
Never operate the lawnmower when you are tired, ill or under the influence of alcohol or drugs.
Do not allow children or people unfamiliar with these instructions to use the lawnmower. Local
regulations may restrict the age of the operator.
Children, pets and onlookers should be kept at least 15
meters away from the work area, unless shielded by an effective solid barrier.
When not in use, store the unit indoors in a dry and locked place, out of reach of children.
PREPARATIONS FOR USE
Remove the lawnmower, handles, grass catcher and all other contents from the box. Remove the spanner,
bolts and nuts supplied from the bag.
Unfold the handles and tighten the knobs (Fig.1).Attach the handle ends to the lawnmower chassis, insert
the four bolts provided and tighten the nuts using the spanner (Fig.2 No.1). Note: ensure the bolts point
outwards.
Assemble the two parts of the grass catcher (Fig.3) making sure that all the clips are fully clicked into
position.
Lift the rear guard flap (Fig.4 No.1) and attach the grass catcher (Fig.4 No.2) ensuring that the grass
catcher latches onto the two mounting hooks.
Check that the blade bolt is securely tightened.
Attach extension cord with suitable female coupler to the plug provided on the lawnmower. In turn
connect to a suitable mains connection plug. All components should meet your national, SANS, IEC or EN
specifications.
Use 25m Lawn Star 2-core cable, min 2x1,0mm, 10.0 Amp rated for mowers rated up to 2200 watts.
THE USE OF THIS LAWNMOWER FOR COMMERCIAL OR RENTAL PURPOSES WILL
INVALIDATE THE WARRANTY.
