background image

 

 

 

WARNING

 

CALIFORNIA 

Proposition 65 Warning 

The engine exhaust from this product 

contains chemicals know to the State of 

California to cause cancer, birth defects, or 

other reproductive harm. 

 

Important:

  

The engine in this product is 

not equipped with a spark arrester muffler. It 

is a violation of California Public Resource 

Code (CPRC) Section 4442 to use or operate 

this engine on any forest-covered, brush-

covered, or grass-covered land as defined in 

CPRC 4126. Other states or federal areas may 

have similar laws. 

To acquire a spark arrester for your unit, see your 

Engine Service Dealer. 
This spark ignition system complies with the 

Canadian standard ICES-002. Ce système 

d’allumage par ètincelle de vèhicule est conforme 

à la norme NMB-002 du Canada. 

The enclosed Engine Owner’s Manual is 

supplied for information regarding The U.S. 

Environmental Protection Agency (EPA) and 

the California Emission Control Regulation 

of emission systems, maintenance and 

warranty. 
Keep this engine Owner’s Manual with your 

unit. Should this engine Owner’s Manual 

become damaged or illegible, replace 

immediately. Replacements may be ordered 

through the engine manufacturer. 
Lawn Solutions reserves the right to make 

changes or add improvements to its products 

at any time without incurring any obligation 

to make such changes to products 

manufactured previously. Lawn Solutions, or 

its distributors and dealers, accept no 

responsibility for variations which may be 

evident in the actual specifications of its 

products and the statements and descriptions 

contained in this publication. 
 

 
 

 
 

 

© 2011 Lawn Solutions Commercial Products, Inc. 
5406 Shepherdsville Road 
Louisville, KY 40228 

 

Contact us at www.lawnsolutionscp.com 

Printed in the USA 

All Rights Reserved 

 

Содержание TA3016KAF1





































Отзывы: