background image

31

GUARANTEE

•  We guarantee this equipment for 24 months.

•  The guarantee does not cover damage caused by natural wear, overloading or improper use. 

   Certain components are subject to normal wear and not covered by the guarantee. These 

   specifically include the: metal cutting blade, cutting line spool, cutting line, line cutter, air filter and

   spark plug.

•  The guarantee is also conditional on adherence to the instructions on cleaning and maintenance.

•  Please keep your receipt as proof of purchase.

•  Please always contact the service center to verify all the specific conditions of guarantee of this  

   product.

DISPOSAL / ENVIRONMENTAL PROTECTION

Do not allow used oil and petrol residues into the sewer system or drains.

Dispose of used oil and petrol residues in an environmentally friendly way – take them to a 

disposal point.

Take the equipment, accessories and packaging for environmentally friendly recycling.

Drain the petrol tank carefully and take your equipment to a recycling point. The plastic and metal 

components used can be separated by type and therefore recycled.

Machinery does not belong in domestic waste.

Содержание LK PBT3446 AUTO


































Отзывы: