Lawn-King FW53E, Оригинальная инструкция по эксплуатации

Страница: 16 / 34

16
Installing/Removing the Nylon Head (Picture 7):
Installing the Guard:
1. Screw the Guard (15) onto the Metal Blade Guard (20) using the 3 screws and nuts (36)
enclosed.
Installing the Nylon Head :
2. Screw the Nylon Head (16) anticlockwise onto the cutting head holder by hand, as indicated
in the diagram.
3. Remove the protective cap on the Line cutter (14).
Removing the Nylon Head:
4. Unscrew the Nylon Head (16) clockwise by hand. To make the work easier, the cutting
head holder (19) and bottom flange (33a) can be locked using maintenance locking pin
(25) (see also picture 6).
5. Removing the Guard (15) and replace the protective cap over the line cutter (14).
Dismantling the metal cutting blade is described in the section on
“Installing/Removing the Metal Cutting Blade”.