22
WARNING!
The use of metal or rigid blades of any type with this machine is
prohibited.
WORKING TECHNIQUES
WARNING!
Use ONLY nylon lines. The use of metal lines plasticized metal lines
and/or lines not suitable for the head can cause serious injuries and wounds.
During use it is advisable to stop the engine periodically and remove the weeds wound round the
machine, so as to prevent the drive tube from overheating due to the grass caught under the
guard.
Remove the caught-up grass with a screwdriver to allow the rod to be properly cooled.
WARNING!
Do not use the machine for sweeping, tilting the cutting fine head. The
power of the engine could throw objects and mail stones 15 meters or more, causing
damage and injuries to people.
Cutting in motion (Scything)
Proceed at a regular pace, with a circular motion similar to a traditional scythe, without tilting the
cutting line head during the operation.
First try cutting at the right height in a small area, so as to then achieve a uniform cutting height
keeping the cutting line head at a constant distance from the ground.
For heavier cutting it can be useful to tilt the cutting line head by about 30°.
WARNING!
Do not work in this way if there is the possibility of causing objects to
be thrown, which could harm people and animals and cause damage.
Precision cutting (Trimming)
Keep the machine slightly tilted so that the lower part of the cutting line head does not touch the
ground and the cutting line is at the required point, always keeping the cutting device at a
distance from the operator.
