DUAL-PROGRAM ELECTRONIC CONTROLLER
I I I I
q
(1) Time key
For setting time of day.
q
(2) Hours key
For setting current hour, start-time hour, and advancing run time in
1-minute increments.
Minutes key
For setting current minute, start-time minutes, and advancing run time in
l-minute increments.
q
(4) Manual key
For temporarily interrupting a watering cycle in progress, or manually start
ing a watering cycle at other than the programmed time.
q
(5) Day key
For setting current day.
On/Off key (Rain Switch)
For preventing watering during wet weather or winter, and de-activating
Zones using the Zones and Days keys.
Start keys
For setting up to six start times per day shared between Program A and B
in any combination.
Days keys
For setting watering days for each Program.
Zones
keys
For programming run times for each Zone.
Display
Shows current time of day, Zone being watered and watering run time.
(11) Terminal screws
For connecting valve wires to controller.
Battery connector
For installing 9-volt battery for backup power in case of power failure.
q
(13) Plug-in transformer
For converting 120-volt household current into safe, low-voltage power.
(250-volt source on 50 Hz units.)
