Lawn-Boy Insight Platinum 10765, Руководство оператора

Страница: 10 / 20

Mulching the Clippings
Your mower comes from the factory ready to mulch the
grass and leaf clippings back into the lawn.
If the grass bag is on the mower, remove it (refer to
Removing the Grass Bag) before mulching the clippings.
If the side discharge chute is on the mower, remove it
and lock the side discharge door (refer to Removing the
Side Discharge Chute) before mulching the clippings.
Important:
The mower has a safety switch that
prevents you from starting the mower unless you
first install the mulch plug securely on the mower
(Figure 23).
Figure 23
1. Top of mulch plug lever in switch channel
Bagging the Clippings
Use the grass bag when you want to collect grass and
leaf clippings from the lawn.
If the side discharge chute is on the mower, remove it
and lock the side discharge door (refer to Removing the
Side Discharge Chute) before bagging the clippings.
The blade is sharp; contacting the blade can
result in serious personal injury.
Stop the engine and wait for all moving parts to
stop before leaving the operating position.
Installing the Grass Bag
1. Remove the mulch plug (Figure 24).
Figure 24
2. Route the starter rope around the lower rope guide
(Figure 25).
Figure 25
Note:
The lower rope guide releases the starter rope
when you pull the recoil start handle.
3. Insert the grass bag handle into the grooves at the
top of the mower (Figure 26).
Important:
The mower has a safety switch that
prevents you from starting the mower unless you
first install the grass bag securely on the mower.
Figure 26
10