Lawn-Boy Insight 33006, Руководство оператора

Страница: 7 / 16

Product Overview
G001164
1
2
3
4
5
6
7
8
Figure 9
1. Discharge chute 5. Control panel
2. Chute handle 6. Handle knob
3. Control bar 7. Rotor blades (inside the
housing)
4. Upper handle 8. Fuel tank cap
1
2
3
4
5
6
G001165
Figure 10
1. Key switch 4. Recoil start
2. Primer 5. Cord connection
3. Electric-start button 6. Choke lever
Operation
Note:
Determine the left and right sides of the machine
from the normal operating position.
Mixing the Gasoline and Oil
This snowthrower uses a 50:1 gasoline-to-oil mixture. Use
Lawn-Boy 50:1 2-Cycle Oil (Fuel Stabilizer Added)
or an equivalent high-grade, NMMA TCW III-certi fi ed
two-cycle oil.
Important:
To prevent engine damage, do not use
automotive oil (such as SAE 30 or 10W30) or fuel mixed
at the wrong gasoline-to-oil ratio.
1. Pour a half US gallon (1.9 liters) of fresh, unleaded
gasoline into an approved fuel container.
2. Add two-cycle oil to the gasoline according to the chart
below (Figure 11):
G001120
Figure 11
50:1 Gasoline-to-Oil Ratio Mixing Chart
Gasoline Oil
1.5 US gallons (5.7 liters) 4.0 ounces (120 ml)
2 US gallons (7.6 liters) 5.2 ounces (160 ml)
3 US gallons (11.4 liters) 8.0 ounces (240 ml)
3. Install the cap on the fuel container.
4. Shake the container to mix the gasoline and oil
thoroughly.
5. Slowly remove the cap and add the remaining amount
of gasoline.
Note:
Do not mix gasoline and oil in the fuel tank. Oil
at room temperature mixes easier and more thoroughly
than cold oil. Oil below 32°F (0°C) requires additional
mixing
Filling the Fuel Tank
Fill the fuel tank with a fresh mixture of gasoline and oil
mixed at the proper ratio (Figure 12).
1/2 in (1 cm)
G001121
1/2 inch (1.3 cm)
Figure 12
7