Figure 46
Important:
Position the curved ends of the
blade to point toward the mower housing.
6.
Use a torque wrench to tighten the blade bolt to
40 to 50 ft-lb (54 to 68 N
⋅⋅⋅
m).
Cleaning
Cleaning the Mower Housing
Service Interval:
Before each use or daily
The mower may dislodge material from under
the mower housing.
•
Wear eye protection.
•
Stay in the operating position (behind the
handle).
•
Do not allow bystanders in the area.
1. With the engine running on a flat paved surface,
spray a stream of water in front of the
right
rear
wheel (Figure 47).
The water will splash into the path of the blade,
cleaning out the clippings.
Figure 47
2. When no more clippings come out, stop the water
and move the mower to a dry area.
3. Run the engine for a few minutes to dry the housing
to prevent it from rusting.
23
Содержание 22270
Страница 27: ...Notes 27...
