The Front Panel
8
R
OTARY
K
NOB
The Rotary Knob has a built in pushbutton switch. By pressing and releasing the knob, the volume adjustment
toggles between 0.25 dB and 3 dB steps.
This knob can be used to adjust the
Monitor Output
Volume of the currently selected digital input. Rotating
the knob clockwise increases the level, and rotating the knob counter-clockwise decreases the level.
When the unit is in calibration mode, this knob adjusts the output calibration setting in 0.1 dB increments.
There are 3 groups of illuminated elements on the Front Panel: the 6 Sample Rate LEDs, the 8 Illuminated
Pushbuttons, and the Level Display. Each of these 3 groups has an independent, user adjustable intensity
setting.
To adjust the brightness of the
Sample Rate Illumination LEDs
, press and hold the
INVERT
,
MONO
, and
CAL
buttons simultaneously and rotate the knob.
To adjust the brightness of the
Illuminated Pushbuttons
, press and hold the
INPUT 1
,
INPUT 2
, and
INPUT 3
buttons simultaneously and rotate the knob.
To adjust the brightness of the
Level Display
, press and hold the
MAIN
and
MONITOR
buttons
simultaneously and rotate the knob.
Once the Volume reaches the top or bottom of the range, the knob may continue to be turned, but no
further adjustments are made.
