FR
73
10. Tourner le carter avant (5) jusqu’en butée, à
l’aide de la poignée (6) (Fig.6).
11. Déposer le réservoir de solution du dispositif
(Fig.7). Le positionner au sol avec soin.
12. Enlever le bouchon de remplissage de la
solution détergente (7) de son siège sur le
réservoir de solution (Fig.8).
13. Remplir avec de l’eau propre, à une
température ne dépassant pas 50 °C et
n'étant pas inférieure à 10 °C.
14. Ajouter le détergent liquide dans le réservoir
de solution dans la concentration et selon les
modes fi gurant sur l’étiquette du fabricant
du détergent
.
ATTENTION : la formation excessive de
mousse pourrait endommager le moteur
d’aspiration, n’utiliser donc que la quantité
minimale de détergent nécessaire.
ATTENTION : toujours utiliser des
détergents dont la conformité aux laveuses-
sécheuses de sol est indiquée sur l’étiquette
du fabricant. Ne pas utiliser de produits
acides ou alcalins ou de solvants sans
cette notice. Il est possible d’utiliser des
détergents d’entretien acides ou alcalins
ayant des valeurs de pH allant de quatre
à dix et exempts de tout agent oxydant,
chlore ou brome, formaldéhyde, solvants
minéraux.
ATTENTION : toujours porter des gants
de protection avant de manipuler des
détergents ou des solutions acides ou
alcalines, afi n d’éviter de graves blessures
aux mains.
ATTENTION : toujours utiliser un détergent
peu moussant. Pour éviter la formation de
mousse, ajouter une quantité minimale de
liquide antimoussant dans le réservoir de
Содержание FIT 35B
Страница 2: ...2...