Cleaning
•
ATTENTION!
• Don’t use any solvents as they may damage the
machine plastic components.
• Clean the machine enclosure with a wet cloth.
• Clean the machine accessories only with water.
• Let the clean brushes dry, with the bristles
turned upwards, to avoid deforming them.
> CLEANING THE BOILER
• All maintenance jobs must be performed only
when the appliance is cold and with the plug
disconnected.
• Clean the appliance boiler every 5 maximum
10 fills depending on water hardness. Such
information can be obtained from your
municipal authorities or water utility.
• Fill the boiler with water and shake well.
Afterwards empty the boiler by tilting the
appliance on one side.
> DESCALING THE BOILER (using the
descaler)
The descaler prevents limescale from depositing on
the appliance components and In the pipes coming
into contact with steam.
•
ATTENTION!
Do not swallow. Do not mix with
other substances. If the product comes into
contact with the eyes or face, wash with plenty
of water. Store in its original, tightly closed
bottle.
S2 = Keep out of the reach of children. The
appliance cannot be used as long as the liquid
is inside the boiler.
• To ensure good and long appliance operation,
the boiler is best descaled according to the
following schedule ( DH= deutsche Haerte)
1 dH = 9,52 gr/l CaO
(Calcium Carbonate)
< 10 Dh:
Every 100 fills
between 10/22 Dh:
every 75 fills
> 22 Dh:
every 50 fills
• To find out water hardness, contact your
municipal authorities or water utility
1 Pour about 1 litre of hot water into the
appliance
2 Pour the contents of HALF the bag provided
and allow the solution to work for about 8
hours
3 Do not close the cap.
4 Subsequently empty the appliance. Because
a certain amount of liquid still remains in the
boiler, rinse this with cold water 2 or 3 times to
remove any scale residues
5 The appliance is now ready to use
• The contents of the bag provided is enough
for two descaling operations. Afterwards any
other antiscale product available on the market
can be used (in powder or liquid).
> HOW TO ELIMINATE LITTLE
FAILURES
Failure
Cause
Remedy
• The steam cleaner is ready
to work, but no steam
comes out.
• The
steam
intensity
regulator (optional) is on
position 0.
• The accessory is obstructed.
• Turn the steam intensity
regulator on position 1-5.
• Check the accessories.
• The flow of steam does not
come out regularly and
is accompanied by water
spray.
• The boiler has been filled
with too much water.
• Press the lever (1) to drain the
excess water. Be careful not to
overfill the appliance (max 1.6
liter).
• When you work with
the steam cleaner, an
accessory comes off.
• The accessory has not been
connected properly.
• Fit the accessory properly.
EN
53
