Rev B 92818 Page | 2
TABLE OF CONTENTS
Introduction/Safety/Tech Specs
2
Quick Start Guide
3
Troubleshooting / Other Features
4
Priming/Default Settings
4
Terms & Conditions
5
Introduction
The MiniWash series is a simple solution for dispensing a single formula at up to 8 oz/min. The dispenser can be trig-
gered with a signal or with an optional push button switch, which can be mounted up to eight feet away. The pump
comes with a standard EPDM squeeze tube and can be used in a wide array of dosing applications.
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN PERSONAL INJURY OR DAMAGE TO
THE EQUIPMENT LEADING TO IMPROPER OPERATION OR PRODUCT FAILURE. DEFECTS FROM A LACK
OF ADHERENCE TO THESE INSTRUCTIONS ARE NOT WARRANTABLE
IMPORTANT: DISCONNECT ALL POWER PRIOR TO SETTING UP THIS DISPENSER.
Safety
Function
Specification
Power Connection (Cable 1)
100
-
240 VAC
Signal Connection (Cable 2)
20
-
240VAC (LO or HI)
Power Consumption
5W
Fuses
400mA 250VAC
Pump Flow Rate
8 oz/min
Max Suction Height
5 feet
Power the pump using cable 1 with the plug. When this unit is powered, the pump is ON. Connect cable 2, identified by
the word SIGNAL to the washer signal. Proceed with programming as shown in this manual.
Technical Specification
