LaView LV-D2104CS Series, Руководство пользователя

Страница: 25 / 153

User Manual of LV-D2104CS,LV-D2108CS,LV-D2116CS Series DVR
24
Auto-switch .
Start Recording Start all-day normal recording or motion detection recording for all channels.
Quick Set Set the video output mode to Standard, Bright, Gentle or Vivid.
All-day Playback Play back the video of the selected channel.
Aux Monitor Switch to the auxiliary output mode and the operation for the main output is disabled.
Note: If you enter Aux monitor mode and the Aux monitor is not connected, the mouse
operation is disabled; you need to switch back to the Main output with VOIP/MON
button on IR remote control and then press the Enter button.
Note: If the corresponding camera supports intelligent function, the Reboot Intelligence option is included
when right-clicking mouse on this camera.
3.2.3 Using an Auxiliary Monitor
Certain features of the Live View are also available while in an Aux monitor. These features include:
•
Single Screen: Switch to the single full screen by choosing channel number from the dropdown list.
•
Multi-screen: Adjust the screen layout by choosing from the dropdown list.
•
Previous Screen: Switch to the previous screen.
•
Next Screen: Switch to the next screen.
•
Quick Set: Set the video output mode to Standard, Bright, Gentle or Vivid.
•
Menu Output Mode : Select the menu output mode to HDMI/VGA, Main CVBS or Auto.
•
Main Monitor: Switch to the Main Output mode and the operation for the auxiliary output is
disabled.
Note: In the live view mode of the main output monitor, the menu operation is not available while Aux output
mode is enabled.
3.2.4 Main/Aux Output Switching
When the HDMI/VGA output is configured as the main output, you can perform the following operation to
switch to CVBS output as the main output.
Steps:
1. Use the mouse wheel to double-click on the HDMI/VGA output screen, and the following message box
pops up:
Figure 3.2 Switch Main and Aux Output
2. Use the mouse wheel to double-click on the screen again to switch to the Aux output, or click Cancel to
cancel the operation.
3. Select the Menu Output Mode to Main CVBS from the right-click menu on the CVBS output monitor.