CHAPTER 1
Identification of the “Instructions Handbook”
The instructions handbook is a document issued by the manufacturing company and is an integral
part of the machine. This document is adequately identified for easy tracing and/or subsequent
references.
All rights relating to the reproduction and disclosure of the information contained in this handbook
and the documentation quoted and/or attached are reserved.
Aim of the document
This handbook contains the information necessary to the customer and assigned personnel for the
correct installation, use and maintenance of the machine at good conditions and at maximum
safety.
Safety precautions and manufacturer’s responsibility limits.
Every operator-machine interaction relating to the intended use of the machine and its overall life
cycle has been carefully and thoroughly analysed by the manufacturing company during the design
phase, construction phase and the drafting of the instructions handbook.
It is nevertheless understood that experience, adequate training and “common sense” of the
personnel operating on the machine are of primary importance. These requirements are therefore
considered indispensable during all machine operating phases and consultation of this handbook.
The non-observance of the safety precautions or specific warnings indicated in this handbook, the
use of the machine by unauthorized personnel, violate all safety standards regarding the design,
construction, and intended use of the machine and relieve the manufacturer from every liability in
the case of damage to persons or property.
The manufacturing company is therefore in no way responsible for the non-observance on the part
of the user of the safety precautions listed in this handbook.
Reference to standards
This document has been drawn up in accordance with the indications given in the following:
-
Attachment “I” of Machine Directive 89/392/CEE and subsequent issues: point 1.7.4;
-
UNI EN 292/2 – 1992, point 5.5
MACHINE MOD.
V
HZ
SERIAL NUMBER
SHIPMENT DATE
TESTING ENGINEER
CHAPTER 2
How to consult and use the “Instructions Handbook”
