10
CLEARING THE BRUSHROLL --
Make sure vacuum is unplugged and in the OFF position
Obstructions such as carpet fibers, strings, hair, throw rugs etc., may shut off brush roll
motor. Turn vacuum over where the underside of the unit is facing you. Pull out or cut away
obstructions from the brushroll area. Stand vacuum back upright. Plug in unit and turn on
switch. Press reset button on top of vacuum hood to restart brushroll motor.
CLEARING THE HOSE AND WAND --
Make sure vacuum is unplugged and in the OFF position
Remove hose with wand from vacuum by unscrewing the hose from the bag housing.
Look into hose and wand for any obstruction. Shake or insert a broom handle to clear
any visible debris. Replace hose and wand on vacuum.
PICKING UP FINE POWDERS, SUBSTANCES, CARPET FRESH POWDERS,
CAN CLOG THE FILTER BAG. --
Please remember to change bags often so that vacuum cleaner can operate at
optimal efficiency.
THE INSTRUCTIONS GIVEN IN THIS BOOKLET SERVE AS A GUIDE TO
ROUTINE MAINTENANCE. TO AVOID UNNECESSARY SERVICE CALLS,
CHECK THE BAG, FILTER AND BRUSHROLLS OFTEN.
MAINTENANCE
Warning:
Avoid injury. Keep loose clothing, hair, fingers, and all other parts of body away
from any moving part (such as the revolving brush). Disconnect vacuum from electrical
outlet before attempting to service it in any manner.
