LAVAZZA Amodo MIO Скачать руководство пользователя страница 3

E N

PREPARING THE COFFEE

COFFEE BREWING  

 

 

The machine is ready when the machine ready light is stea-
dily on.  

 

 

Only suitable Lavazza “A MODO MIO” pods should be placed 
in the pod holder. Do not put your fi ngers or any other object 
in the holder. The perforator in the pod holder might injure 
fi ngers.

 

 

Single-dose pods brew a single coff ee/product. DO NOT use 
the pods more than once.  

 

 

In order to perform the above listed operations the steam/
water knob must be closed.

 

 

Preheat the pod holder. Insert it without the pod and press 
the brew button. Water will be dispensed from the pod holder 
(this operation has to be performed only for the fi rst coff ee). 
After 50cc of water has been dispensed, press the brew but-
ton again to stop dispensing.

1

   Place the pod in the pod holder. Make sure it is correctly placed.

2

  Insert the pod holder into the brew unit matching the pod holder 

mark. 

3

  Turn the pod holder from left to right until it locks into place. Place a 

coff ee cup under the dispensing spout.

4

   Press the coff ee brew button and wait for the desired quantity to be 

brewed.

 

 

 

Do not remove the pod holder whilst brewing.

5

   Press the button again to stop brewing.  Remove the cup with the 

coff ee.

 

 

It is recommended not to brew coff ee for longer than 60 sec-
onds. 

6

   Turn the pod holder from right to left until it locks fi rmly into place.

7

   Take the pod drawer slightly out and empty the used pod there or 

dispose of.

 

 

The pod drawer can contain only 4 pods and it also contains 
the post-brewing liquids.

 

 

It is recommended to remove the used pod immediately af-
ter brewing in order to prevent unpleasant odours caused by 
pods left in the pod holder for a long time. 

Содержание Amodo MIO









Отзывы: