background image

 

4.   Place the item in the bag and place the bag with the rough/embossed side down. Lift   

 

   

the front of the machine and place the top of the bag into the bag locator (F).

  5.   Close the lid and you will hear the pump start up. You must then 

press down firmly across the  

   

full width

 of the lid and hold until -0.3 bar is reached on the gauge. This is most easily achieved 

   

by placing your hands as shown. Failure to press down across the full width of the lid is the 

 

 

second  most common cause of problems with Lava machines. This process is not required on 

   the 

PREMIUM

 models, as the magnets hold the lid down.

  6.   The machine will draw all of the air out of the bag to a pressure of -0.90 bar and will then seal the  
   

bag automatically before switching off after a few seconds.

 

7.   You can now raise the lid and remove the sealed bag. Before packing other items, check that the  

 

 

seals look OK – see Checking the Seal

Packing at a Lower Pressure

When the item you are packing is fairly soft or contains too much liquid to be packed at -0,90 bar then 
you will need to pack at a lower negative pressure. You will need to experiment to find the optimum set

-

ting. This can be done as follows:

 

1.   Set the vacuum pump control switch (R) to ‘II’

 

2.   Set the manual/auto switch (S) to ‘MAN’.

 

It is vital that the top of the bag is correctly located with the full width of the bag  

inside

 

 

the bag locator. Failure to locate the bag properly is the most common cause of problems 

 

with Lava machines.

Operation manual – January 2014 – © by la.va

4

V.300

®

 

Premium

Bag

Locator

Side View

Содержание V.300 Premium










Отзывы: