background image

LAVA Computer MFG                                                                                          STS Product Family User Manual – A01 

 
 

  2 Vulcan St. Toronto, ON        Tel:  +1 416 674-5942         www.lavalink.com

                                

12 of 20 

  Canada, M9W 1L2                   Fax: +1 416 674-8262         Toll Free (US & Canada): 800 241-5282

 

 

  

Ports, Indicators, and Buttons 

 

“Mode Select” Button and Indicators 

 
The Mode Select Button is located on an end face of the STS** case. This button selects the Charging 
Mode. SimulCharge Mode and Charge-Only Mode are described in the Tablet Charging section. 
 
By pressing the Mode Select button for at least ¼ second then releasing it, the Mode is toggled between 
SimulCharge Mode and Charge-Only Mode. If the button is pressed for more than 4 seconds, the button is 
ignored until released then pressed again. 
 
The active state (Charge-Only or SimulCharge) is reported on a status lights on one end of the STS** case. 
 
The yellow indicator is for SimulCharge Mode. 
 
The green indicator is for Charge-Only Mode.  
 
The STS** Products default to SimulCharge Mode; therefore the yellow indicator is active by default. 
 
When the STS** Product is powered on the green indicator (Charge-Only) will flash on and off for 2 
seconds. The indicator is flashed 20 times during the 2-second startup. 
 
 

“Micro-B USB To Tablet” 

 
The “To Tablet” Receptacle is a standard Micro USB-B Receptacle. 
 
The custom 39” (100 cm) cable provided with the STS** product provides the connection between the 
STS** and the tablet. The custom cable has a Micro USB-B connector at each end. It does not matter 
which end of the cable is attached to the tablet or the STS** product. 
 
The STS** to Tablet cable must not be extended, as the additional power loss in the wires will result in 
unreliable tablet charging and operation. 
 
The STS** Product Family supports an alternative OEM cabling scheme which can be discussed with a 
Lava Sales Representative, when lengths greater than 39” (100 cm) are required. This OEM option does not 
use the “Micro-B USB To Tablet” receptacle. The standard products are not shipped with this OEM option 
implemented. 
 

Note:

 The STS (formerly TL002c) is provided with a 8” (20 cm) cable. This cable should not be extended 

as it may result in unreliable tablet charging and operation. 
 

Содержание STS Series





















Отзывы: