background image

           

 

STS Product Family 

User Manual

 

April 28, 2015 

Revision A01 

 

Abstract 

The LAVA STS Product Family allows select Samsung Tablets to be charged while interacting with USB 
accessories, and enable a tablet-based kiosk or enclosure to support a variety of applications requiring: 

 

 

OTG USB Host operation with simultaneous tablet charging 

 

Interaction with USB accessories while charging the tablet 

 

Wired network operation (10/100 Ethernet) 

 

Power over Ethernet (PoE) 

 
The STS Product Family work with out-of-the-box (unrooted) Samsung tablets, and are ideal for 
commercial and OEM applications.  
 
This document describes the ports, indicators, and buttons on the STS** Products. This document describes 
how to test and setup a STS** device. The term STS** is used in this document to refer to a member of the 
STS Product Family. 
 

Contents 

Introduction.....................................................................................................................2 
System Requirements ......................................................................................................3 
Hardware Testing and Setup............................................................................................4 

Hardware Test - Out of the box unit.............................................................................4 
Hardware Setup - STS (formerly TL002c) ...................................................................6 
Hardware Setup - STS-3U ...........................................................................................7 
Hardware Setup - STS-E, STS-2UE, and STS-2UE+ ...................................................8 
Hardware Setup - STS-PE, STS-P2UE, and STS-P2UE+.............................................9 
Special Instructions for the Samsung Tab 4 ...............................................................10 

Tablet Charging (SimulCharge versus Charge-Only Mode) ...........................................11 
Ports, Indicators, and Buttons ........................................................................................12 

“Mode Select” Button and Indicators.........................................................................12 
“Micro-B USB To Tablet”.........................................................................................12 
“Micro-B USB 5V Power Input” ...............................................................................13 
“Micro-B USB Aux 5V Input” ..................................................................................13 
“USB-A” receptacles .................................................................................................13 
“ETHERNET” Port and Indicators ............................................................................14 
“PoE-ETHERNET” Port and Indicators.....................................................................15 
“PoE power” Indicator...............................................................................................15 

Power over Ethernet (PoE) ............................................................................................16 
STS Module (formerly TL002c) ....................................................................................17 
Dimensions ...................................................................................................................19 
Technical Support .........................................................................................................20 
History ..........................................................................................................................20 

 

Содержание STS Series





















Отзывы: