Lava PAYLINK-IP/232, Руководство по настройке

Страница: 14 / 27

Rev. A07 PayLink-IP/232 Configuration Guide Page 13 of 26
8. Password configuration
If you choose the “Passwords” option from the main Configuration Menu, a screen of the following form will appear:
Figure 14: Password configuration
This dialog box allows a new administrator’s password to be set for the PayLink-IP/232. Enter the new password, con-
firm it by retyping it in the second entry box, and then click the “Submit” button. To configure the PayLink-IP/232
when no password is set,
do not enter any characters into the password box ; simply click on the “Configure” but-
ton.
This dialog box also has fields for entering a new “unlock password”. This second password is used when the PayLink-
IP/232 has locked itself against three failed attempts being made to supply an administrator’s password, as described
below. Enter the new password, confirm it by retyping it in the second entry box, and then click the “Submit” button.
To unlock the PayLink-IP/232 when no password is set,
do not enter any characters into the password box ; simply
click on the “Configure” button.
NOTE: As a security feature, after a user has made three consecutive failed attempts at entering an administrator’s
password, the PayLink-IP/232 will refuse further password attempts. The password dialog box will also disappear from
the opening screen.
To unlock the PayLink-IP/232, it must be given the “unlock password.” To do so, direct a web browser to the address
“xxx.xxx.xxx.xxx/unlock.htm”, where “xxx.xxx.xxx.xxx” is the IP address of the unit. At this point the “unlock password”
can be entered. Should six consecutive failed attempts at entering an unlock password be made, the PayLink-IP/232
will be locked against configuration changes or further password attempts until it has been rebooted. On rebooting,
the user will again need to supply the unlock password to configure the device. If the unlock password is unknown,
contact Lava Technical Support for assistance.
Whether under administrative lockout or after rebooting, the PayLink-IP/232 will continue to operate as currently con-
figured, but will not be available for configuration changes until a proper password has been supplied.