![background image](http://html.mh-extra.com/html/lava/est-simulcharge-e/est-simulcharge-e_quick-installation-manual_680296009.webp)
LAVA Computer MFG Inc.
LAVA eSTS Family Quick Start Guide - Rev C05
2 Vulcan St. Toronto, ON
Tel: +1 416 674-5942
www.lavasimulcharge.com
Canada, M9W 1L2
Toll Free (US & Canada): 800 241-5282
Page 9
Once you see
“
Controller detected
”
in the
STATUS
window (Figure 11), the LTM
application has successfully detected the LAVA hardware.
Figure 11: STATUS window upon detecting a connection to the LAVA product
If your product is functioning properly
, “
Controller detected
”
will be replaced by a
“
Controller ran @hh:mm:ss
”
(hour:minute:second) time which will update
approximately every 30 seconds (Figure 12).
Figure 12: STATUS window once the product is functioning properly with LTM
7.
After establishing a connection with the mobile device, the Green eSTS status LED light
will begin blinking on and off to indicate whether the eSTS product is in a charge cycle
(eg. Green LED is mostly on and briefly off) or discharge cycle (eg. Green LED is briefly on
and mostly off). The
STATUS
window on the LTM home screen will also indicate if it is
charging or discharging, with a message that says “charging phase” or “discharging
phase” (Figure 12).
8.
Plug your peripherals and/or Ethernet cable into the eSTS product (if applicable).