1. With the power turned off, insert the Octopus-550 card into any
free PCI slot in your PC. Make sure the card is well seated. Attach
the cable. Turn your PC on and start Windows.
2. Windows will automatically detect the
as a new PCI
Serial Controller and ask you to insert the Installation Diskette.
The installation files are located in the root directory of this disk.
Windows XP may display a message to the effect that the drivers
are not digitally signed. This warning can be ignored.
3. After the necessary files have been copied, Windows will
complete the full installation of the
. During this
process, two
parents will be created in Device
Manager under Multi-Function Adapters, and eight child ports
will be created under Control Panel | System | Device Manager |
Ports.
Octopus-550
Octopus-550
Octopus-550
Windows 95/98/Me/2000 Installation