LAUSON
IRON
AIR203
4
EN
HOW TO USE:
Make sure you have removed all packing material.
•
Ensure that the selected tension on the voltage selector coincides with the tension of the mains.
•
To eliminate the smell given off by the appliance when used for the first time, it is recommended have it
on at full power for 2 hours in a well-ventilated room.
•
Prepare the appliance according to the function you wish to use.
FILLING WITH WATER:
It is essential to have filled the deposit with water to be able to work with steam.
•
Open fill opening cap.
•
Fill the deposit taking care to observe the MAX
•
Close fill opening cap.
USE PURPOSE:
Fully release the power cable before use
Plug the appliance into the main power supply.
For safety, put the iron on some support base or a stable and flat surface
Follow the specifications of your clothes label, choose the set temperature. Slide the thermostat dial to
the desired temperature position. Do not use temperatures higher than those indicated on the
garments to be treated
The pilot light comes on
● Temperature for synthetic fibres (Polyester, Nylon…)
●● Temperature for silk and wool.
●●● Temperature for cotton. (Minimum temperature for steam ironing)
-
Max Temperature for linen
If garment has various kinds of fibres, select the temperature for the fibre that requires the lowest
temperature. (For example, select the temperature for polyester for an article made out of 60%
polyester and 40% cotton
Note: Lauson iron will only produce steam in the 'Cotton (Cotton) / (Linen) setting.
DRY IRONING:
The appliance has an option to dry ironing (without steam). To use this option turns on only the iron
temperature dial.
STEAM IRONING:
It is possible to iron with steam whenever the deposit is filled with water and the adequate temperature is
selected.
FORDABLE HANDLE
By pressing the button (7) the handle is folded for an easy storage
STEAMSHOOT:
• This function proportions extra steam for eliminating wrinkles.
• Press the steam blast button (2). Wait a few seconds until vapor penetrates the fibers of the garment
before pushing the button again. For optimum steam quality, do not apply more than three successive
blasts.
• The steam blast button might require to be pressed repeatedly to release the first shot.