MAX
F
A
B
C
D
E
To extend the life of your appliance, we recommend that you
rinse the steam generator and clean your iron every month or
after every 10 hours of ironing.
WARNING : the appliance should be UNPLUGGED, OFF
and COLD before cleaning. Switch off and unplug the ap-
pliance. Allow your appliance to cool down for at least 2
hours. Always make sure your appliance is cold before
cleaning !
NOTICE ! Only rinse the appliance with water. NEVER use des-
caling products or other chemical products.
Cleaning the iron (2)
If the iron’s soleplate is dirty, use the cleaning mat in accordance with
the instructions. This can be obtained at www.laurastar.com or from your
approved Laurastar retailer.
Stubborn stains can be cleaned using an abrasive dishwashing sponge.
After completing this operation, remove the aluminium oxide present un-
der the soleplate by cleaning it with a damp cloth.
Clean the steam holes in the iron’s soleplate as soon as they become
blocked up or calcified. Clean the holes using the appropriate tool. This
can be obtained at www.laurastar.com or from your approved Laurastar
retailer.
C
Anti-scale filter change (13)
The anti-scale filter has to be changed when the granules are completely
brown.
• Remove the water reservoir (11) from its place. Take off the water reser-
voir lids. Remove the anti-scale filter (13).
D
• Dispose of the filter (13) in the regular houshold garbage and rinse the
compartment. Install a new anti-scale filter in the water reservoir.
E
• Fill the reservoir with tap water. The filtered water must reach the MAX
level. Then put the reservoir back in its place on top of the steam
generator (15).
F
Note: you can wash the plastic elements of the water reservoir (11) in
the dishwasher.
Maintenance
A
B
- 12 -
EN
