Laundrylux CROSSOVER 2.0 Series, Руководство по эксплуатации

Страница: 10 / 22

Coin Meter
2:2
decimal point is turned off, and prices are set and displayed as “number of coins or tokens” required
(e.g. “12”). In either case, the value of each coin drop is stored in Register 031 “Coin Value 1” and
Register 032 “Coin Value 2” and determine how much the remaining price will be reduced each
time a coin is deposited. The coin-value registers can be adjusted to accommodate any currency.
Free Dry / OPL Mode
When the Amount To Start (ATS) register for a program is set to 0.00 (00 in “token mode”), the
program operates in “Time per push mode” (this is free dry mode). In this mode, each time a
program button is pressed, the remaining time is incremented. The first press adds the “Time for
Amount to Start” register value (Register 044 – 047) to the drying time, and then each additional
press continues to add the “Time per Push or Coin” (Register 048 – 051) to the drying time. These
registers are only accessible in Full Service Mode. In no case shall the displayed remaining dryer
time be greater than the “Max drying time” for that program.
Each program (temperature) button has a group of registers (040-055) assigned for setting vend
time, price, and maximum allowable time. The registers are organized to provide maximum
flexibility for vended operations, yet simple programming for non-vended applications (Free dry).
Price and Time Registers
Time for Amount to Start
The time for amount to start registers Register (044 – 047) defines the time credited when the
amount to start has been paid or the base time of the drying program when Amount to start = 0.00
(00 in token mode). This time is credited when a program-selection (temperature) button is pressed
for the first time if the remaining drying time = 0. These registers are only accessible in Full Service
Mode.
Time Per Coin (or Push In Free Dry Mode)
Register (048 – 051) defines the time, in minutes, that is credited when a coin pulse is received
from a payment device or when a program button is pressed when amount to start (ATS) Register
(040 -043) = 0, AFTER the initial “Time for amount to start” has been credited, whether the
machine is idle or operating. This register is only accessible in Full Service Mode. Once these
registers are set, the control vends the same amount of time for each coin pulse received from
the payment device (or push of a program button if Amount to start = 0 for that program), up to the
Maximum drying time specified for the particular program.
DISCOUNT PRICE “PROMOTION” PROGRAMMING
The dryer can apply “Promotion” percentage discount to the vend price of a program selection at
specified times and days. Up to four different Promotion discount events and percentages can be
selected using the dryer’s built-in Real Time Clock (RTC) or one promotion event can be selected
using an optionally-installed, external signal provided by a clock-driven relay or switch. This signal
can activate multiple dryers. Both options require setup via the service registers, access to which is
described in the Service Mode section of this manual.
During machine setup, the promotional discount is represented by a three-digit percentage (%%%)
and can range from 000% (no discount) to “999” = 999%. It defines the percentage by which